Jeevamrutham through drip model:
Jeevamrutham tanks:
He build two Jeevamrutham tanks next to our cattle shed each with 1800 litres capacity approx. Each tank is of 5 feet high and 4 feet in diameter with 2 outlets, the first outlet (3 inch) is at the bottom to send the slurry out and the other one is 1 inch which is 1 feet high from the ground so that all the sediments from the undisturbed Jeevarutham is stuck between these 2 outlets.
Filter bed:
Jeevamrutham flows from 1 inch outlet to the filter bed, filter bed is 3.5 feet wide, 3 feet high and 8 feet long and has a 1 inch outlet in the bottom. It is filled with 2 inch pebbles,1 inch pebbles and ½ inch pebbles and coarse sand each of ½ feet, 2 inch pebbles at the bottom and sand on the top.
Filtered Jeevarutham tank:
This tank is to just store the filtered Jeevamrutham, there is a 1 inch outlet from bottom of the filter bed to this tank. This tank is 3.5 feet wide, 6 feet high and 8 feet long. He use a 0.5 HP mono block pump to inject filtered Jeevamrutham to the drip mail line.
How this filter works:
He mix the ingredients of Jeevamrutham in the tank ( i.e Desi cow dung, Desi cow urine, Jagger, Flour and hand full of mud) according to the proportion and stir it for 2 days and leave it untouched for 12 hours so that all the un dissolved heavy particles will settle down. He use the inch outlet on the tanks to run Jeevamrutham into the filter bed where it gets filtered and moves the tank next from where it gets pumped to the drip. The left over sediments in the tank can be drained using the 3 inch out let at the bottom of the tank and use it.
Filter Cleaning and maintenance:
Depending on the frequency of the usage, efficiency of the sand on the top will slowly come down, so try to remove the top layer of sediments on the sand whenever possible and replace the top sand with fresh sand when the efficiency comes down drastically. Once year or when ever required remove the two layers of pebbles and put them back after cleaning them.
Few more things to take care of this filter:
- Have at least 3 inch outlet for slurry so that it doesn't get clogged.
- Adjust capacity of the tanks according to your Jeevarutham needs.
- Under the filter bed have the outlet at least ½ inch above the base so that any heavy particles if at all any will settle down.
- Attach foot valve covered with a mesh to the inlet pipe of the motor as a precaution to prevent dry leave, flowers and other going into the drip system.
- Pay attention to use the round shaped gravel and avoid flat faced stones in the filter bed.